There’s nothing more frustrating than a leaking vape, but unfortunately it’s something we’ll all experience at some point, even with a reliable brand like Vaporesso.
In this blog, we’ll answer the question ‘Why is my Vaporesso leaking?’ and provide tips and guidance on how to fix the issue and prevent it from happening again in the future.
Shop a wide range of popular Vaporesso vape kits and replacement pods at TABlites.
Why Is My Vaporesso Leaking? Quick Diagnosis
If your Vaporesso is leaking, the first step is to work out where the e-liquid is coming from. Common causes include overfilling, e-liquid entering the airflow, a flooded coil, an incorrectly fitted mouthpiece or a worn or damaged pod.
Use the table below to identify the most likely cause and what to try first.
| Where Is It Leaking? | Likely Cause | What to Try First |
|---|---|---|
| Bottom of the pod | Flooding, worn pod, damaged seal or condensation | Remove the pod, dry the contacts and inspect the cartridge |
| Airflow hole | Flooded coil, overfilling or e-liquid entering the airflow | Wipe away excess liquid and check the filling method |
| Mouthpiece | Flooding, condensation or excess liquid in the vapour channel | Clean the mouthpiece and check for excess liquid |
| Around the fill port | Mouthpiece or fill-port cover not sealed correctly | Reseat the mouthpiece or fill-port cover firmly |
| New pod leaking immediately | Overfilling, incorrect filling or possible pod damage | Check the fill port, seal and cartridge for damage |
| Older pod suddenly leaking | Worn coil, wicking or cartridge seals | Replace the pod if cleaning and correct refilling don't solve the problem |
Quick Fix: What to Do First
Remove the pod from your Vaporesso and wipe away any visible e-liquid from the cartridge and device connection with a dry tissue or lint-free cloth.
Check that the pod isn't cracked or damaged, make sure the mouthpiece or fill-port cover is properly closed, and confirm that you haven't accidentally put e-liquid into the central airflow opening.
If the same pod continues to leak after these checks, the cartridge or its built-in coil may be worn and need replacing.
One important distinction: A little moisture underneath your Vaporesso XROS pod isn't always a leak. Condensation can collect around the connection during normal use. However, repeated pooling of e-liquid, gurgling or liquid escaping from the cartridge suggests a problem worth investigating.
Why is my Vaporesso pod leaking?
There are a few reasons why your Vaporesso pod might be leaking:
1. It’s been overfilled
Putting too much e-liquid into the pod can cause it to overflow or enter the airflow channel, eventually leaking from the bottom of the cartridge.
The fix is usually straightforward. Make sure you're filling the pod through the correct filling port and leaving the recommended amount of space rather than filling it beyond its maximum level.
If you've accidentally overfilled the cartridge, remove it from the device and carefully wipe away any visible excess e-liquid using a dry tissue. Check the airflow opening and accessible contacts for liquid before reinserting the pod.
You should also check that you're squeezing your e-liquid into the correct hole. On many top-filling Vaporesso XROS pods, the e-liquid filling port is marked in red and sits beside the central airflow opening. Accidentally filling through the airflow opening can cause e-liquid to pass through the coil chamber and escape from the bottom of the pod.
Not every Vaporesso pod uses the same filling arrangement, so always check the instructions for your particular cartridge.
2. The mouthpiece isn’t attached properly
Another reason your Vaporesso device could be leaking that (fortunately) is easy to fix is that the mouthpiece hasn't been attached properly after refilling the pod.
On top-filling XROS cartridges, the mouthpiece needs to be correctly seated to seal the filling area. If it hasn't clicked back into position, e-liquid may escape around the top of the cartridge.
To fix this issue, remove the pod, check that the mouthpiece and seal are clean and undamaged, and make sure the mouthpiece has been properly clicked back into place before you start vaping again.
If your Vaporesso uses a side-filling or bottom-filling cartridge, check that its silicone filling plug is securely closed instead.
3. The coil is burnt out or the pod is worn
In some cases, a leaking pod can be a sign that the cartridge or its built-in coil is reaching the end of its usable life.
Over time, repeated heating and refilling can affect the condition of the coil, wick and cartridge. A worn pod may start producing less flavour, develop a burnt taste or become more prone to flooding and leaking.
Many regular users find that Vaporesso XROS pods last around one to two weeks, although this isn't a fixed lifespan. How long a pod lasts depends on your vaping habits, e-liquid, power settings and the particular cartridge you're using.
For more detail, read our guide to how long Vaporesso pods last.
If your pod has started leaking after a period of normal use and cleaning doesn't solve the problem, replacing the cartridge is often the most practical solution.
4. The pod is damaged
If you're prone to dropping your Vaporesso pod when refilling, it could be leaking because it's damaged or cracked.
Even a small crack in the plastic cartridge or damage to its seals can allow e-liquid to escape. This may be especially noticeable when the pod is full or when it's carried in a pocket or bag.
Remove the cartridge and inspect it carefully for cracks, loose seals or visible damage around the filling port.
Unfortunately, a cracked or damaged pod should be replaced rather than repaired or reused. Continuing to use it may allow more e-liquid to collect inside the device.
5. The pod or coil is flooded
A flooded pod occurs when more e-liquid reaches the coil than it can vaporise. You may notice gurgling, reduced vapour production, e-liquid around the airflow opening or liquid appearing underneath the cartridge.
Flooding can happen when a pod is overfilled, e-liquid enters the central airflow opening during refilling or the cartridge is no longer sealing and wicking as intended.
To fix a flooded Vaporesso pod, remove it from the device and carefully wipe away any visible excess e-liquid from the cartridge and device connection with a dry tissue.
Check that you haven't overfilled the pod or accidentally put e-liquid into the airflow opening rather than the correct fill port.
Make sure the mouthpiece or filling plug is properly sealed before trying the pod again.
If the same cartridge repeatedly floods despite being filled and used correctly, the pod may be reaching the end of its usable life and need replacing.
6. The e-liquid doesn't suit your pod or coil
E-liquid thickness can affect how well it works with a particular Vaporesso pod or coil.
For many Vaporesso XROS setups, a 50VG/50PG e-liquid is a sensible starting point. This includes compatible nic salts and 50/50 freebase e-liquids.
However, the right e-liquid depends on the pod resistance and device you're using. Some lower-resistance XROS pods are designed for different power levels and may perform better with a different e-liquid ratio.
Larger, higher-powered Vaporesso devices may be designed for thicker, higher-VG liquids, so the same recommendation doesn't apply to every Vaporesso kit.
Very thin e-liquids may contribute to flooding in some setups, while liquids that are too thick for a particular coil may struggle to wick properly and lead to dry hits.
If you're using an XROS and experiencing repeated flooding, leaking or poor wicking, check that your e-liquid is suitable for your specific pod before assuming the device itself is faulty.
Should I Keep Using a Leaking Vaporesso?
Don't ignore persistent leaking.
Remove the pod, clean any visible e-liquid from the cartridge and accessible device contacts using a dry tissue or lint-free cloth, and identify the cause before continuing to use it.
If the pod is cracked, visibly damaged or continues to leak after you've checked the filling method and cleaned the device, replace the cartridge.
If e-liquid has entered the device itself, or you notice damage to the battery or electronics, stop using and charging the device and follow the manufacturer's guidance.
Never attempt to dismantle the internal battery or clean inside the electronics with water or other liquids.
Still Leaking? It May Be Time to Replace Your XROS Pod
If you've checked the fill port, cleaned away excess e-liquid and inspected the cartridge but the same pod continues to leak, the cartridge or its built-in coil may have reached the end of its usable life.
A cracked or damaged pod should also be replaced rather than reused.
Need a replacement?
Explore our Vaporesso range for compatible replacement pods and other Vaporesso products.
Not sure which resistance to choose? Different XROS pod resistances offer different levels of warmth, airflow and vapour production, so it's worth checking compatibility with your particular kit before buying.
Wondering whether your current cartridge is simply worn out? Read our guide to how long Vaporesso pods last.
How Can I Stop My Vaporesso From Leaking Again?
Once you've solved the immediate problem, a few simple habits can help reduce the chances of it happening again.
- Fill through the correct port: Always check where the e-liquid should go, particularly if you're using a new type of Vaporesso cartridge.
- Don't overfill: Follow the recommended filling level and avoid getting e-liquid into the central airflow opening.
- Close the pod properly: Make sure the mouthpiece or filling plug is securely fitted after every refill.
- Keep the connections clean: Remove the pod occasionally and wipe away any condensation or e-liquid residue from the accessible contacts.
- Use suitable e-liquid: Choose an e-liquid ratio recommended for your particular pod and coil.
- Replace worn or damaged cartridges: If a pod repeatedly leaks despite correct filling and cleaning, don't continue using it indefinitely.
- Store your vape carefully: Keep it upright where practical and avoid leaving it in hot environments or direct sunlight.
More Vaporesso XROS Help & Advice
At TABlites, we've put together practical Vaporesso guides covering common questions about XROS pods, refilling, compatibility and maintenance.
If your cartridge is leaking, producing weak flavour or reaching the end of its usable life, our guide to how long Vaporesso pods last is a useful next step.
You can also explore our Vaporesso vape kits and Vaporesso range for compatible products.
For suitable e-liquids, browse our nic salt e-liquids and 50/50 e-liquids.
Need help choosing the right Vaporesso kit, pod or e-liquid? Get in touch with the TABlites team and we'll be happy to help.