Aspire Speeder and Short Fill E-Liquid Bundle Deal

Aspire Speeder Features:

Dimensions: 88mm x 46mm x 31mm
Wattage: 200w Output
USB Charging Port
Upgradeable Firmware
Screen: 0.96" OLED Display
Spring Loaded 510 Connector
Dual 18650 (Not Included)
Auto Screen Rotation 
Temperature Control: Ni200, Titanium and Stainless Steel SS316L
Voltage, Wattage, Bypass and Temperature Mode 

What's In The Box?

1 x Aspire Speeder 200w Mod
1 x Micro USB Charging Cable
1 x User Manual

Cleito EXO Sub-Ohm Atomiser Tank Features:

Height: 57mm
Diameter: 23.5mm
Capacity: 2ml
Stainless Steel Construction
Top Filling
Top Airflow
Uses 0.16Ohm Cleito EXO atomiser heads.
Fully Compatible with original Cleito Atomiser Heads

What's In The Box?

1 x Cleito EXO Tank (TPD version with 0.16ohm atomiser head installed)
1 x Spare 0.16ohm Atomiser Head
1 x Extra Drip Tip
2 x Extra O-Rings
Aspire Warranty Card
User Manual.

How To Fill The Aspire Cleito EXO

Simply unscrew the top cap and pour your e-liquid into the tank, taking care to avoid getting liquid into the centre of the atomiser head. Screw the top cap back into place and allow juice to soak into the coil for a minute or two. You're ready to vape!

Changing the Atomiser Head

Ensure that your tank does not have excess juice in it. Unscrew the top cap and pull the tube section away from the base. Unscrew the spent atomiser head from the base and dispose of it. Screw a new atomiser head to the base and prime the coil by adding a few drops of e-liquid to the exposed cotton in the wicking ports. Replace the tube section onto the base and fill your tank per the above instructions. Replace the top cap and allow two to five minutes for your juice to soak into the coil. You're ready to vape!