Aspire Triton Mini
The latest of Aspire's excellent atomiser tanks is the exceptional Aspire Triton Mini which features a unique top-filling system so you don't have to dismantle your tank to fill it, and a handy 2ml capacity making this tank a must have for any serious vaper.
With adjustable airflow the Triton Mini gives you a perfectly customisable vape, and with the ability to use regular kanthal coils, claptonised kanthal coils or the Ni200 Nickel temperature control heads the Triton Mini can be used on almost all of your favourite devices.
The replacement coils are easy to swap out by simply unscrewing the base of the device. For detailed instructions please see below.
What's in the Box?
1 x Aspire Triton Mini Atomiser Tank (with 1.8 ohm Clapton Coil installed)
1 x 1.2 ohm kanthal coil
1 x extra Pyrex tube
1 x User Manual
Stainless Steel Construction
Pyrex Glass Tube
Replaceable Atomiser Coils
Top-fill juice tank
How to Fill the Aspire Triton Mini:
Unscrew the drip tip section of the tank to expose the filling ports.
Turn the selector wheel at the top of the tank so the indicator arrow points towards the symbol of a liquid drop which closes off the wicking holes in the tank and opens the filling ports.
Pour your e-liquid into the filling ports until it is just below the top of the tank.
Wipe away any excess e-liquid around the filling ports.
Turn the selector wheel until the indicator arrow points to the stylised face blowing vapour to close the filling ports and open the wicking holes.
Reattach the drip tip section and you're ready to vape.
How to Change the Atomiser Coil:
Ensure that the selector wheel at the top of the tank is pointing towards the stylised face symbol. If it is pointing to the droplet the tank will empty when you invert it.
Invert the tank and unscrew the very bottom metal section where the airflow ring is located. Half of the metal base section should remain attached to the glass tank.
Take care not to unscrew the whole metal section from the glass section as this will cause flooding and leaking.
Separate the metal base and unscrew the atomiser coil from the removed airflow section.
Screw a new atomiser coil into the airflow section.
'Prime' the atomiser coil by placing a few small drops of e-liquid onto the exposed wicking material.
Reattached the airflow section to the rest of the tank, ensuring it is properly screwed on.
Place your tank back on your device and after 2-5 minutes to allow for wicking you will be ready to vape.