Aspire Cleito Sub-Ohm Atomiser Tank
Aspire have once again proven to be one of the top innovators in the e-cigarette world with this fantastic sub-ohm tank.
With its sleek design and easy to use refilling and coil changing systems, the Cleito will provide excellent no fuss vaping that's perfect for any sub-ohm fan.
The new replaceable Cleito Atomiser Coil replaces the need for a built in chimney inside the tank, allowing for a much wider flavour profile from your e-liquids.
Included in the box is a 0.4ohm atomiser coil, a 0.2 ohm atomiser coil and a selection of silicon ‘Cleito Cuffs’ in various colours. You can personalise your tank to suit your mood or to remind you what flavour you have in that particular tank. They also have the added benefit of dissipating heat from the metal parts of your tank.
The atomiser coils use a cotton wicking material and ‘claptonised’ kanthol wire to give the very best flavour possible.
Finally, with a super easy top-filling system, this tank is not to be missed.
The Aspire Cleito is available in Stainless Steel or Black.
What’s in the Box?
1 x Aspire Cleito Tank
1 x Replacement Glass Tube
1 x Vape Band
4 x Rubber Cuffs
1 x Replacement Coil
- 3.5ml Capacity
- New Coil System
- Top Fillling
- Stainless Steel (304)
- Wide-Bore Delrin Drip Tip
- Available in Black or Stainless Steel
- Celito Cuffs dissipate heat and let you personalise your tank
- 0.2 ohm (55 - 70W)
- 0.4 ohm (40 -60W)
How to fill:
To fill the Cleito simply unscrew the metal disk at the top of the tank (where the drip tip is located) and pour e-liquid into the tank. Try to avoid pouring excess e-liquid into the atomiser coil.
Reattach the metal disk and allow a few minutes for your e-liquid to soak into the atomiser coil.
Changing the replacement atomiser coil:
First, ensure that your tank is empty of e-liquid to avoid spillage.
Unscrew the bottom cap of the atomiser (the part that connects to the battery). The atomiser coil screws into this section. Simply unscrew the spent coil and replace with a new one.
‘Prime’ your new atomiser coil by adding a drop or two to any exposed wicking material.
Screw the tank back together, fill as above and wait a few moments for the e-liquid to soak into the new atomiser coil.